Ralph Ring Teleportation and Esoteric Consciousness


Published on Aug 24, 2016 Ralph Ring has had an ongoing interest and participation in areas of Esoteric & Ether Knowledge and Technologies. After leaving the US Army in 1954, he began an ongoing search for answers to many questions concerning the Unknown. In brief, he worked for a US Government funded research facility in the areas of Magnetic’s, Levitation and Teleportation. His search eventually led him to the Realities and participations of Teleportation and Esoteric Consciousness.
.
Ralph is a Natural Scientist and a Creative Technician who in the early 1960’s worked together with Otis T. Carr (A Prodigy of Nikola Tesla)and a team of dedicated Scientists on Alternative Technologies, one of which was Teleportation. He was One of three to pilot a Man Made Spaceship, the OTC-X1. His Dream since birth has and is to produce Levitating Homes, Cities and Countries.

Janet Lessin and Sasha Lessin http://www.aquarianradio.com

 

Ralph Ring Flying the OTC-X1 Spacecraft

In a dramatic experiment, Ring co-piloted a 45 foot disk a distance of ten miles, arriving at their destination instantaneously. Published Dec 13, 2012

Anti-Gravity & Conscious Awareness | Ralph and Marsha Ring, Global BEM

How consciousness powers a free energy New Earth: Ralph & Marsha Ring with Host Patty Greer


“Everyone is everywhere” How non-local Love consciousness powers a free energy New Earth: Ralph & Marsha Ring with Host Patty Greer
By Alfred Lambremont Webre
WATCH VIDEO: https://youtu.be/0QpmIyyD-As
NewsInsideOut ARTICLE & LINKS
https://newsinsideout.com/2017/03/eve…
NewsInsideOut ARTICLE & LINKS

Visit Ralph & Marsha Ring’s website:

http://bluestarenterprise.com/

Disruptive Technology and Free Energy Under Donald Trump? ~ WeAreChange


In this Luke Rudkowski interviews an expert on disruptive technology and creator of the Thrive documentary Foster Gamble. Many rumors have circulated about Donald Trump releasing new technologies that the U.S government has kept secret and in this video we give you some context on this very important issue.


To find out more about Foster Gamble check out http://www.thrivemovement.com/about_us

Visit our MAIN SITE for more breaking news http://wearechange.org/

PATREON https://www.patreon.com/WeAreChange?a…
SNAPCHAT: LukeWeAreChange
FACEBOOK: https://facebook.com/LukeWeAreChange
TWITTER: https://twitter.com/Lukewearechange
INSTAGRAM: http://instagram.com/lukewearechange
STEEMIT: https://steemit.com/@lukewearechange

OH YEAH since we are not corporate or government WHORES help us out http://wearechange.org/donate

We take BITCOIN too
12HdLgeeuA87t2JU8m4tbRo247Yj5u2TVP

Free Energy Technology: QEG Building Basics Webinar ~ HopeGirl587


Building Basics Package: http://www.energyefficientgenerator.c…

Build your own fuel-less generator in 5 stages and get off the grid:
Stage 1: Prepare your space
Stage 2: Research & study
Stage 3: Order parts
Stage 4: Build it to 1st resonance
Stage 5: Advanced principles & experiments (2nd & 3rd resonances)

Imagine….
*You can be proud of building your own generator
*You have it running your home
*You had all the building information you need
*You have the confidence of a Master Builder

Are you tired of paying Big Energy when you know there’s got to be a better way?

If you answered yes to this question…let us be the first to tell you…

IT’S NOT YOUR FAULT that the knowledge needed to build your own powerful alternative energy device has been suppressed for over 100 years.

IT’S NOT YOUR FAULT that everything you needed to know about other forms of energy production was removed from even the textbooks

IT’S NOT YOUR FAULT that you never heard about radiant energy or have been tricked into believing you can’t have any other energy source but what the energy companies provide – and charging you a small fortune for it.

IT’S NOT YOUR FAULT that you don’t have anyone giving you the correct information until now.

In this webinar I’m going to take you through 5 stages to making your own generator and getting off the grid. Possibly, you will go from not knowing anything about building your own free energy device, to being able to build one.

QEG Updates and Humanitarian Solutions The Peoples Free Energy Show


June 9, 2015

If ever there was an update to watch it is this one!  We’ve put a ton of updates from the last few months of hard work into this episode on the QEG Project.  In this hour long episode, Tivon and Hope update all those following the work of the QEG project on the latest, plus they cover the mini QEG design and some of its implications. In the second half we read a powerful letter that provides one example of people in need of electricity in the world. Tivon walks us through some basic practical examples of solutions that could help people in such situations.

Watch Here

Related Show Links

QEG’s Around the World:
Austria: https://hopegirl2012.wordpress.com/2015/04/26/qeg-workshop-in-austria-may-1617/
Guadalupe: https://hopegirl2012.wordpress.com/2015/04/30/qeg-in-the-caribbean-gaudeloupe-has-resonance/
Japan: https://hopegirl2012.wordpress.com/2015/05/03/qeg-japan-mini-qeg-has-resonance/
Greece:  https://hopegirl2012.wordpress.com/2015/05/05/qeg-greece-introducing-odyssevs-ellas/
Hungary: https://hopegirl2012.wordpress.com/2015/05/08/hungary-mini-qeg/
China: https://hopegirl2012.wordpress.com/2015/05/11/qeg-china/
Bangladesh:  https://hopegirl2012.wordpress.com/2015/05/17/qeg-bangladesh/

QEG Resonance Binaural beat meditation: https://hopegirl2012.wordpress.com/2015/05/01/qeg-resonance-binaural-beat-daily-affirmation-meditation-to-help-fix-our-world-free-download/

QEG Rosetta Stone Project: http://www.gofundme.com/QEGRosettaStone

Tesla No Longer to Sell QEG Kits: https://hopegirl2012.wordpress.com/2015/06/03/tes-no-longer-to-supply-qeg-kits-important-qeg-update/

QEG Manual 3rd Edition: https://hopegirl2012.wordpress.com/2015/06/06/new-free-qeg-build-manual-3rd-edition-includes-tuning-instructions/

SOLN1 solar assembly solution:  https://www.youtube.com/watch?v=MUUwnMwRlTk

Gerard’s original vid https://www.youtube.com/watch?v=XOq9C3YSjKg

An example of wind solution https://www.youtube.com/watch?v=dl6m4emdeBI

 

NEW FREE QEG BUILD MANUAL 3RD EDITION INCLUDES TUNING INSTRUCTIONS!


From James Robitaille: This update is based on the results of our own latest research and experiments, and is meant to show our supporters and all those who have embraced the project, that we have a clear way forward toward producing overunity with the machine. It is hoped that this will encourage all who have invested time and money in this project to continue on with tuning and finalizing the generator…

In conclusion, I (James) feel that I need to help everyone involved in our project to fully understand the underlying principles of how this machine works as I understand it, and how we are on our way to producing a self-sustaining generator with output power well in excess of the input power.

Hope Girl ~ The Peoples Free Energy Show Ep 1- Tivon Rivers


For our debut show Hope Girl interviews special guest Tivon Rivers, an Electronics Engineer and former Navy technician with 16 years of experience. Tivon shares his hands on experience in the field of free energy development, his amazing tesla pancake coils available for energy experiments, and his time spent at the UK QEG build. Tivon is here in Morocco to assist with moving the Morocco QEG to its new location and gives us updates on the latest developments in the QEG world.

Audio Only

Related Show Links:

Fix the World Organization
www.fixtheworldproject.org

HopeGirl Blog
hopegirl2012@wordpress.com

Space Visuals
www.spacevisuals.com

Tivon Rivers Artwork
www.tivonrivers.com

FTW QEG Reports

Morocco Test and Measurement Report
https://hopegirl2012.files.wordpress….

Financial Report of QEG Expenses
http://hopegirl2012.wordpress.com/201…

QEG Project Report Assessment
http://hopegirl2012.wordpress.com/201…

Latest Discoveries in QEG Technology
http://hopegirl2012.wordpress.com/201…

Technical Update QEG Instructions for Engineers from James Robitaille Phase 3
http://hopegirl2012.files.wordpress.c…

Free Energy Trolls A New Paradigm Guide
http://hopegirl2012.wordpress.com/201…

http://the-one-network.org/the-peoples-free-energy-show-ep-1-tivon-rivers/

Interesting developments with building a QEG with no moving parts


Below is a copy of a post on the forum from Cliff in response to Jimmy´s latest QEG transformer findings:
————————————————————————
Hi Jimmy,

I have updated your document with comments (in red). Your design is not a Heins transformer design, and I am not sure what is happening here. I think you might have invented a new design with OU.

Strictly from the shape of the plots it looks like your over-unity factor is much higher than you think. Maybe in the 20 to 50 OU range. Accurate measurements are needed to make sure. Almost all of the i/p power is going into core energization, and virtually nothing is being transferred to the output. The o/p power is coming from somewhere else, but visual inspection of the plots is not enough to be sure.

You may have stumbled on something remarkable. It is tough to tell at these low power levels. I believe less than 1W of real power is being reflected back to the primary, and this may be the first proof that o/p power does not come from the pri at all, but directly from the quantum energy field,as I have suspected all along. The pri just opens the gateway to the energy reservoir, and handles a Lenz law reverse flux response.

The differing current wave shapes of pri and sec coils is telling us that something very weird is going on here, with substantially higher OU. I do not see a clear current step through zero volts on the pri, that would be indicative of real power in the primary coil, which leads me to believe your OU is really very high.

We need more explicit details on each scope plot. Are the two primary coil sections differentially wound? Look at the Makarov transformer.

Cheers Cliff
—————————————————————————–
For the document and the rest of this discussion please visit the forum:
http://be-do.com/index.php/en/forum/qeg-general-topics/376-what-happens-when-overunity-is-achieved?start=354#2757

QEG Forum: Be-Do.com

Marsha and Ralph Ring Interview with Lotus Guide


Talk about ‘Breaking the Mold” They surely did after Ralph who represents an entire generation of researchers and innovators who’s work has and will change the world that we live in.

UK QEG Has Resonance!!


We did it again!! UK QEG HAS RESONANCE! This just in… assembly has just been completed, and the first phase of resonance has been reached. The next step is tuning to bring it to over unity, then we will achieve self running, as indicated by our simulation testing environment. Its almost time folks! We are unstoppable! Thank you so much to all of humanity who have supported Fix the World and the Engineers that are working so hard to bring free energy to all of us and liberate the planet.

http://youtu.be/-r6gc4mgHs8

What it’s like to try to build a Free Energy Device in an Underdeveloped Country


Source: http://hopegirl2012.wordpress.com/2014/05/10/what-its-like-to-try-to-build-a-free-energy-device-in-an-underdeveloped-country/

“>

In an attempt to explain our silence for the last month, we wanted to write this short update for Fix the World and the QEG family.

We have been in an area in Morocco –an underdeveloped country – building a Quantum Energy Generator (QEG) with at least 30 engineers, and a total of about 70 people from over 20 different countries. What we are doing here is a humanitarian project: to build a generator that will run a well and provide water to 300 poor people of this village. The excitement of opensourcing the QEG, and our open invitation to anyone who wanted to come join us, brought in a lot of amazing people with broad backgrounds and great forward-thinking ideas. Still, our goal remains the same; to help the people in this village.

For the rest of the world outside of this secluded village, we wanted to make sure we were able to clarify what “underdeveloped” really looks and feels like, and what our experience has been building here. We feel an explanation of the conditions we’ve had to endure for a project like this is important, since it is you – The People – who provide the impetus to keep going when everything around us looks insurmountable.

No Internet

Other than extremely sporadic moments of luck, we have basically had no means of communication with the outside world for over 3 weeks. Some members of the community here use “internet sticks” that work very slowly, very poorly and have daily limits of usage (when indeed they do decide to work). So basically we have had no internet, no means of reading anything online, watching Youtube videos, checking email, looking on Facebook, keeping up with Skype, etc. etc. One keeps trying though, and the frustration builds. On occasion, someone will get an internet connection and perhaps have about 10 minutes of time here or there, but for the majority of time we’ve had no luck.

The result of not having proper communication for almost a month is a mixed one. On one hand we don’t get to see much of the negative stuff flying around about our project, but on the other hand, we know with proper updating we could avoid misinterpretation of our actions. We’re only vaguely aware that gross mistruths are being spread, which is probably a good thing. We remain focused on the goal.

Local Communication Problems

Most of us here do not have phones, and we are pretty spread out in the village. In a world where a text message saying “Where are you? Can you meet me at the corner?” is not possible, simple communication is very difficult when you have to walk 1/2 a mile to find the person you’re looking for. The best you can do is hope the person you need to talk to happens to show up for the community dinner. In addition to this, there are many different languages being spoken here, including German, Norwegian, French, Spanish, English and Arabic, and translation can be a little tricky. This has made local communication incredibly scattered and disconnected, and often things get miscommunicated, especially when plans change (which happens a lot).

No Basic Supply Industry

We were able to find wood, bolts and capacitors in Morocco, but 90% of the basic parts and tools needed to build the QEG had to be brought here from other countries. Shipping costs are quite high since you will have to purchase overnight postage if you want your item in 3 weeks. These things caused huge delays and severely cut into our budget for the project (expenditure update coming soon!) In an effort to get the parts we needed on time, we bought plane tickets to fly people here carrying the parts in their suitcases. Also we had to deal with this country’s bureaucracy as Moroccan Customs wouldn’t release the QEG core for 2 weeks! We drove 12 hours round trip to Casablanca twice, and spent entire days fighting with customs to get them to release our property to us. It may not be practical to ship processed cores, so it will be wonderful to watch these problems be eliminated as the CICU (cottage industry community unit) here gets funded and grows.

Physical Comfort

As mentioned, there were about 70 people here just for the QEG build. Some of us were lucky and were able to get a bed or share an apartment, but most people slept on mats in a large shared room in the community house. In areas where there is indoor plumbing, there are usually problems and sometimes you have to walk up the hill to find a shower with pressure and hot water. Many Moroccan toilets are holes in the floor with a bucket of water for flushing. Unfortunately a handful of us, including HopeGirl, came down with dysentery and were sick for days. That is in addition to the general intestinal malaise that seems to linger….

The Villagers

The people who live here are mostly very poor, but not unhappy. They plant and harvest their own crops by hand, bent over in the fields all day. The villagers walk with their donkeys for a full day’s journey to the nearest town for supplies, normally a 15-30 minute car ride. The women pull water (and do all the back-breaking field work too) from the well and fill plastic bottles to bring home. Only about 50% of the villagers have any electricity at all. Most of the people here have no idea that the entire world now knows about Aouchtam due to the internet and the work that some of us are doing here. But everyone here knows there’s an important project going on – and they love us!

So, circumstances have caused considerable delays, expenditures and disinformation regarding our project here. Nonetheless, we are committed to seeing this through and dedicated to our goal. So many wonderful people have come together to make this happen, and we are in great spirits due to the glorious support we have from The People, despite the problems. Work here will continue on the QEG for the next one to two weeks… or until it is complete. Jamie and some of the engineers are remaining here in Morocco to do this. As for myself and my mother Valerie, we are leaving Morocco to go where we can have the reliable internet access we need to catch up on the rest of the work around the QEG and Fix The World.

Many updates are coming in the next 2 weeks including tons of instructional video footage to edit and upload. We have several blog posts to compose with lots of information. We have many emails to catch up on and future QEG builds to plan.

We want to thank our friends in the alternative media team that have been writing blog posts and sharing videos with the world whenever they could find an internet connection. Much more to come from the QEG team, please stay tuned!

QEG Basics – Great “Addendum” to the Manual **EXCELLENT READ**


April 22, 2014

While Yes the Quantum Energy Generator is open sourced and there is a working prototype there seems to be a lot of confusion online just what is up with the QEG and its open sourcing.  This post will serve a huge purpose in illuminating a few aspects of the QEG including some basic specs for those seeking such data.

A lot of the information found in this post can be found from the two videos posted here within this post.  Primarily I am taking the data from the recording of James M. Robitaille in Morocco on April 19th.

While yes the prototype was and is producing “raw” power from the core it seems as if the plans are not yet fully finished.  The idea to open source the project as soon as it could be proven to work was really done to enlist the help of other people on the project.  A whole bunch of groups of people each working on their own QEG will be able to test a multitude of different insulations, core sizes, etc while sharing what is learned along the way to help out everyone on the project.

It seems there is a lot of skepticism naturally surrounding the QEG right now and in face of no video showing explicitly it powering something, it will exist to some degree and will continue to exist while being introduced to the people.  The entire idea of going through the hassle of open sourcing a hoax really makes no sense however you slice it.  That being said I do see both sides of the coin in releasing of video proving the QEG works.  It is an interesting dilema and I feel FTW & team made the right call by allowing the people to release proof the QEG works.  It really does not seem to be that far off that a QEG will be powering a pump of some sorts to provide water to the village of Aouchtam in Morocco.  All we have to do is wait patiently as with the number of bloggers taking part in the co-creation over there, it will be impossible for a working free energy device to go on unreported about in the village they reside in 🙂

The QEG can be scaled to size to suit a lot of different needs.  The basics are all the same but changing the size ultimately effects the output of the machine.  The QEG can be built bigger or smaller but when changing the core size, the resonating frequency will also change as well.  The resonating frequency the QEG is currently scaled to is at 200 Hertz.  Its good to know that the primary frequency is half (1/2) of the output frequency.  The other main component that gets changed with the scaling is the power availability.  The smaller the generator the less power which can be produced and vice versa for a larger generator.  Also good to note that the lower the frequency the machine is resonating at, the more power that can be harnessed.  This really has impact during the tuning process.  The QEG will not just resonate at its peak spot, it will also resonate within many different harmonics and this is where attention to the machine and its wave output is critical in fine tuning it by observing the waves being produced.

Working Theory in 30 Seconds

The QEG is nothing more than a “tank” or “tuned” circuit.  Within the core, power generation is achieved really through varying the parameter of inductance to produce a known effect known as “parametric oscillation”.  According to Google a “a parametric oscillator is a harmonic oscillator whose parameters oscillate in time.” “Parametric resonance occurs in a mechanical system when a system is parametrically excited and oscillates at one of its resonant frequencies.”  As the inductance is different within the core at the poles and between the poles when the rotor is aligned or not aligned, the rotating of the rotor allows for this effect to take place and the power to be generator through operating at its peak resonance.  When the rotor is aligned at the poles it has 27 henries and when the rotor is unaligned in between the poles is has less at 11 henries.

As the rotor begins to spin a small voltage begins to build within the circuit and once it is running the power build up “takes off” as it begins to run in resonance.  If you have watched the video of the group in Taiwain achieving resonance, there is an audible difference when the generator is in resonance.  As the rotor gets into its groove spinning at peak resonance, there is ample help from the circuit as it seems to try to phase lock the rotor into spinning at the peak resonance.  Peak resonance is achieved at a rather low RPM varying from 2000-3000 RPM by the QEG.  (More specifics to come through testing and building)  It is built for a lower RPM though it would be important to note that if you up the RPM once the QEG is tuned into it’s resonant frequency this increases the power output by pushing the generator into a deeper resonance putting off deeper sine waves.  There are a lot of working ranges here and is completely dependent on the scale though through testing and observation one will be able to find the sweet spot of the QEG and tune accordingly.  May not be the easiest the first time but with working knowledge and success comes the ease of replication and much easier as more people DO and share.

The only thing the QEG needs have added into the mix to produce the power is the mechanical energy needed to spin the rotor in the core.  This is achieved through the motor and there exists a plethora of add ons to the generator here and the initial plans.  A battery could be added which would be wired to stay charged while running but would also hold enough power to restart the generator so it is 100 % self powering.

The core consists of 4 windings around the steel core.  These windings are technically vibrator coils with the 2 primaries being the 3100 turn coils and the secondaries being the other 350 turn coils.  The two primaries are wired in series by connecting the starts of each coils together.  This also serves as a safety check by insuring to keep the voltage on the core as low as possible since in series the core can only produce half the total voltage on the core.  Also these windings are opposed and one is winded clockwise and the other counter-clockwise.  These windings keep the oscillation going within the core

In this generator the specifics of the metal core being M19 at .025″ thick (24 gauge) at 140 lamination depth is very important as once the generator is running and tuned into resonance, the steel in the core experiences a “piezo” effect in that the steel itself starts to vibrate and resonate with entirety of the core.  This effect also allows the coil to produce more power.  While the exact grade of the steel does not have to be this specific grade, the same inductance can be found throughout different grades with a different amount of windings on the coils.  There is a mechanical resonance as well as a tunable electrical resonance at work in the generator.  Someone working on a similar model made the core from M 15 with less windings in the coils at 2600 turns opposed to 3100 turns and it produces the same inductance.

Insulation, Magnet Wire, & Taiwan Issues

The magnet wire in the manual described is very specific for a few specific reasons.  The letters and numbers indicate the different coating/insulation put on the magnet wire.  Particularly on the 10 gauge magnet wire it needs to have a superior insulation which is known as inverter grade.  James found two companies which offer the wire in the US being Essex (Ultra Shield??) and REA (Pulse Shield).  He makes it seem like these may be the only two companies offering manufacture of it but having spoken with a few different wire companies they too offer similar products in 20 gauge magnet wire being inverter grade.  As to specific specs, I cannot speak to that further than they said they offer a comparable product to REA’s Pulse Shield coating.  This coating is good to about 12,500 Volts which is about half of what is needed for the core.  The remainder will need to be made up in adding other layers of mylar or other insulators around the windings.

Once the generator is properly tuned the energy from the primary transfers much better into the secondary and the Voltage doesn’t go as high.  James jokes that with everyone with a screwdriver and the specific motor used in Taiwan most likely led to what happened over there as the motor speed control was changed by a screw.  The RPM was turned up a little too high and it seemed to short circuit 5 turns in the primary coil once it was taken apart and examined.  Nothing arced to the core and everything was contained within the coil.  When it was taken to be rewound, it was rewound with a layer of mylar in between the windings.  (The windings of the coils take some practice even for companies like Torelco offering their winding services for this project.  A lot of the accepted changes seem to being made to the cores being processed by Torelco though not 100% positive on that at the moment)  Prudence here would be the word of the day as enough insulation is required around the core for about 25,000 Volts and it cannot be too big as it has to stay small enough for plenty of clearance by the rotor.  A method called vacuum impregnation could be used to insulate the entire core and is really the best and most efficient method of insulation of the cores.  It is dipped essentially into the insulation material/epoxy and vacummed into the nooks and crannies of the windings to provide a very close and great insulator and when done right adds double the insulation value with very little space.

The amount of insulation required on each winding can be calculated by taking the max Voltage divided by the number of turns in the windings.  (James uses Max Voltage/6200 turns to get the insulation requirement per turn of the winding)  When James left Taiwain, the group was still deciding how to go about rewinding their coil and how the insulation will be spread throughout.  Once again it is a matter of providing enough insulation and not making it too big.

Mica plates, mica tape, and mylar tape were all used in the prototype to get the core ready to be wound so absolutely no wires from the winding was touching the core.  There was talk of using a bobbin to help here with that though my understanding and comprehension of that part is a little hazy so I will hold off on commenting though if any can share with me to edit this part, please do 🙂 (The video also offers a lot of insight into manufacturing the cores for production in different methods of insulating the core from the windings to prevent arcing and shorting of the windings)  The key is if the QEG is built to withstand the high voltages it will produce ample power!

With the realization after the plans were made and open sourced that the generator is a High Voltage Low Current machine, the 10 gauge requirement in the core windings on the secondary coils does not need to be 10 gauge.  When the the prototype was built it was specified for 10 gauge wire to allow for up to 40 Amps though now that it will not be producing that high a current, James is pretty confident that 12 guage wire could be used instead of 10 gauge wire and be more efficient.  With that said, here exists a great opportunity to really drive the point home that these plans are currently being revised as more research and DOing is done and experimenting with the QEG.  The more people who are testing out cores, set ups, different ideas, the faster there can become a collective model & plans based off of all findings of everyone involved.  The “end-all-be-all” model if you will.  It is through this DOing and testing different insulators, different methods, etc etc that the best will emerge and will be adaptable by all who are working on the project.

Operation – Free Energy to Aouchtam

It has taken James a little bit of time and really thinking outside of the box and the help of others, particularily in Taiwan to realize that the QEG is in its essence a High Voltage Low Current machine.  Understanding this will help in tuning the machine also it will help in finding the best way to get the power from the QEG into usable power for our everyday equipment.  At this point it is not even close to impossible to get some decent output from the generator using a grid tie in inverter that is on the market.  The design of the QEG is for a max of 600 Volts at least for the step here in having an interface to provide the power into usable form.  This can easily be achieved through the use of different electronics or a simple grid tie in inverter and through their use the output potential should easily be able to be quadrupled.  It seems the biggest challenge now is finding a decent existing interfacing solution that can handle the high input of Voltage.   The inverter that is in Morocco is rated at 650V and 5 Amps which will allow for the generator to produce about 3,000 Watts.  Roughly 600 Watts will go to running the motor of the generator and the remaining roughly 2,400 Watts will be usable for providing power to a water pump to pump water from a well for the village of Aouchtam.  (Specifics on the well, pump, and all that in Aouchtam seem to be a little up in the air at least as per the video, being that I am not in Morocco or in constant communication with the people out there, I can only speak to what data I have available to me)

At this point James also talked about running another inverter in series to crank up the usable output to about 6,000 Watts.  That is roughly 5,400 Watts of continuous usable current by using  inverters though currently the team in Morocco has only one.  The cost & efficiency of running a few inverters in series is really not the best way to go in the future but is a “fix” that will allow ample power to be drawn and used from the generator.  To bring down the cost and up the efficiency of the output there is talks of using a line transformer at this step to provide what is needed.  Essentially the same thing outside on the telephone poles as they are built for high voltage low current.  Same here as with the current inverters, if there is something that will match this application to specs, it is not in anyone’s (that I have been in communication with) awareness.  Inverters are not made to handle the higher voltage levels the QEG produces.  James has spoken with a few companies who manufacture transformers and to get a transformer for this particular application does not seem to be a hard task, it is just going to be an additional cost and potentially not the cheapest route from jump street as the transformers would need to be customized to this application.  It will be interesting to see and hear how this is dealt with in Morocco though at this point James is very confident in the generators ability to produce 3,000 Watts of usable power from what the team in Morocco currently has.

Exciter Coil – New Revelations

It seems there has been some issue in getting the exciter coil to work throughout some different projects though the change in view of the machine into a high voltage low current machine has allowed for breakthroughs in the understanding of the exciter coil.  This is really a change that Voltage on the output is suppose to be about 10 times higher than what they were originally looking at in that range.  James is very confident that when 2,000 Volts is applied across the exciter coil, it will resonate, in fact he says “it will ring like a bell”.  The potential exists to get more than 10 KiloWatts of power out of the QEG but is really dependent on fine tuning the machine and really learning it and getting it at peak efficiency.  One great thing the exciter coil does is the also polarize the core over time which will make the output higher just by running the machine.

“The keys are there and the mystery is gone!” James remarks in the video.  Ultimately it is up to people all over the world to take part in this project, design your model a certain way, and share the results so improvements are made all the time and a lot of the learning shared through collective action.  I hope this post will help you maybe understand a little better just what is going on in the QEG, more details, and really saving you from having to watch and digest the important points of a 57 minute video!  Additional info can be found from a video featuring James in Taiwan on 4.13.2014.

Hope Moore presents the QEG at Rising Earth Symposium


“Free energy has been released to the people. You can choose to be skeptical if you wish, but in time (perhaps just a few short months) the reality of what is happening will become more and more apparent.”http://www.fixtheworldproject.net

Please Donate to support Rising Earth so we can continue to bring you those with the solution to the challenges we face:
http://thegoldenlightlondon.wordpress…
http://www.risingearth.co.ukhttp://hopegirl2012.wordpress.com/don…

QEG Update: Germany got Resonance 5kV @ 500mA


Someone built a QEG in Germany, they now have resonance. After 20,000 downloads on March 25th alone, the project itself has now gone viral. Teams of engineers around the world are forming to bring QEG to the One People, by the One People, for the One People as individuals courageously stand in their power in non-compliance to system rules and regulations designed to keep us enslaved in a matrix of debt thru indentured servitude to the “system”.

QEG is patent free, has been open sourced to the world for further research and development. The QEG forum is a great place for learning and staying abreast of the progress as engineers around the globe tweek out minor issues with the prototypes. People are already designing blueprints smaller and larger units, teams of engineers in many country’s are waiting for components to be shipped so they may begin R&D for their area.

My thanks go out to Hope Moore and her family for having the foresight, knowledge and courage to step forward and gift free energy technology to the world, without self interest or greed as the motivating factor.  This is how we build a New Earth, when enough people have forfeited the Service to self mentality by  surrendering their lives in Service to the “Common Good” humanity will shift into the New Paradigm at lightening speed.

I’m now working as Moderator for the QEG forum at be-do.com where you can follow QEG’s progress, ask questions to get in on the conversation or simply observe.

Forum link: http://be-do.com/index.php/en/forum

Skype chat group: skype:?chat&blob=8vkiR7ebm0Qpkq-AcMJESlHu45g7afBrKTL_5pHbdN7xLcCpWntRmzHyFCSTHGbdq-ZFzHrm57_DWgJvQwlsOAZOkdznIhHI1pSGYPio8Y0KMAiL1sYbAopiBAj2otGf7zfkRmze0fscdWJv1Rlj6UwzcSkMp8pUYSizUBjEd2bqLZmB_rQ9ZGw96FkMe4VpN0cAb9Slf68Lu8UhLD0V7olzTvRfAGRHdFwAhampxAt74ubVp_E

HISTORY OF THIS ROOM… In Excerpts:
> http://www.greenenergyinvestors.com/index.php?showtopic=18939&page=1
(over 700 views there)
It was just updated it. Hope it is useful for some Newbies, etc.
Please keep in mind, the attitude of GEI is that of Open-minded skeptic.
And there are 1-2 posters there who are less open-minded than Dr Bubb, GEI’s founder.
If you want a sign-on at GEI, send me (Bill S.) a message on Skype
BTW,
For those who wonder who is TZ, TechZombie, here’s a Video he made:
https://www.youtube.com/watch?v=zUMO3of1x4M

I just created a new category for QEG updates under Quantum Physics for future posts and you can find all past entry’s under the Free Energy and/or Science and Technology categories.

Thanks to the hard work of people like Hope and many others with heartfelt desire and dedication in building a New Paradigm that serves the greater good of humanity, the momentum appears to be building exponentially…much love to all, Mahalo! Annette

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

He writes in the comments that he has been tuning this machine for about a year and also gave up several times, but then with the Plans from Hopegirl he could bring the machine to work.a later test resulted in 9.3kV at 0.7A. But still underunity the exciter coil is not working proper…

FIX THE WORLD PROJECT’S PUBLIC STATEMENT, APRIL 2, 2014


 

130 years ago, Nikola Tesla designed an over unity fueless generator that could provide enough power to power your home. This technology was heavily suppressed as a way to control the people of this planet through dependence on oil. Tesla’s designs and patents are in the public domain.

Through research, study, help from others, divine inspiration, and 27 years of electronics engineering experience, James Robitaille of the Fix the World Organization (FTW) was able to figure out how to build this generator with a few modern twists. We raised the money to build the prototype through crowdfunding and donations from over 1,000 people who believed in us. It took us 5 months to build the prototype, and once we were successful, on March 25th of 2014 we open sourced the plans and gave away the technology to the world. Our Quantum Energy Generator (QEG) provides 10KW of power output for less than 1KW input, which it supplies to itself. Now that this raw power source is achieved and shared so freely, there will be many variations and improvements and humanity will be co-developing the future of the QEG and will be free from the enslavement of the oil industry.

FTW has never, nor do we ever intend to own or control the QEG. It is an unconditional gift to the world. FTW has given away the technology; it is up to the people to build, research, promote, prove, demonstrate, innovate and share the technology.

It belongs to humanity and it is up to the people now to spread the QEG around the world. We encourage every person in every country to take the initiative, organize in local teams, create forums, websites, youtube videos. Gather your engineers, your business managers, source the parts, raise the funds, and distribute them to your people. You can do so through what we call a Cottage Industry Community Unit. (CICU)

FTW does not sell QEG’s. We help teach others to build them and if necessary, we may play a role in organizing the supply of the parts to CICU’s who are building QEG’s. We are an organization with over 60 projects that can change the planet and help people in need. The QEG is our pilot project.

Our organization needs funding so that we can continue our work and bring more projects to the world in a similar fashion. This is the way we hope to get funded: establish a give back agreement with CICU’s that are building and selling QEG’s. This agreement is a choice, not a requirement , and can be in any amount that the CICU likes and can be adjusted according to the CICU’s needs at any time.

There have been many attempts at releasing free energy technology in the past. There are many working devices that have been proven over and over again. None of them were successfully delivered to the people. We believe that there are two reasons for this: violent suppression from opposing corporations and negative human characteristics such as greed, fear and control.

Therefore, the only way humanity would have the free energy it needs to survive would be through a completely unconditional and selfless act of kindness and a social media awareness strategy. This is why FTW did it this way. If we tried any other approach, we might not have been successful at our ultimate goal: Above all we want to bring free energy to the people and end the suffering on this planet.

What has been done is unstoppable. Free energy is here NOW. It is Real and it is in the hands of The People. In the first 24 hours of open sourcing, 20,000 people downloaded the plans. Since then social media has allowed it to go viral at record speed. The plans are everywhere in many countries. Engineers are taking this very seriously and we expect that in the next few months, QEG’s will be popping up everywhere. There are simply too many people on this planet to control; we will reach a tipping point.

Note: QEG IS HAPPENING NOW!! I highly encourage everyone to donate, I’m also working with HopeGirl to bring the QEG to Hawaii. I believe in this project so much, I’ve personally made a donation to the project to help make this happen.

This paradigm shifting project promises to lay the foundation for massive changes, opening the door wide open to erase poverty from the planet once and for all. If you haven’t seen HopeGirl’s 2012 video “Fix the World” (below), it’s well worth your time. She did a great job outlining how free energy technology is the necessary key for eliminating global poverty.

Here’s the new QEG website Building Nova Earth

You can make a donation HERE

 Part 1

Part 2

Part 3

QEG Takes Off for China and Taipei


QEG family at the PFC conference in Taipei. Asia is taking the QEG very seriously. Many flew in to Taiwan from all over main land China to train to build QEGs and bring them back to China. They have done this at a great sacrifice that ha all of us in tears. THIS IS HUGE! It’s in Chinas hands now!!! Look for the QEG at an energy conference in Shanghai in April.

QEG: NOW OPEN SOURCED


small QEG-HopeGirl-logo

As Promised, here are the open sourced documents for a quantum energy generator. This has been made possible by the people and for the people. It is freely given to the world.

CLICK HERE FOR QEG OPEN SOURCE DOCUMENTS

An average modern household requires 5-10KW of power  to operate.

A conventional generator needs   15KW to produce 10KW of power.

To produce these 15KW of power we rely on gas, diesel, propane, coal or other products that can be metered creating profits for the oil industry.

130 years ago Nikola Tesla invented and patented an energy generator. This is a resonance machine that only needs 1KW of input power to produce 10KW of output power.  His patents are now in the public domain.

The Fix the World Organization has reproduced Teslas design with a few modern twists to generate the same results.   Our Quantum Energy Generator (QEG) provides 10KW of power output for less than 1KW input, which it supplies to itself.

We have freely given this technology to the people of the world.  We’ve open sourced a full set of instructions, user manual, schematics and parts list for any engineer to follow and reproduce the same results.

How the QEG works:
First we use a starting power source, such as an outlet or a crank to power the 1 horsepower motor. This motor spins the rotor in the generator core. The unique oscillator circuitry configuration in the generator core causes resonance to occur. Once the core achieves this resonance it can produce up to 10KW of power, which can then be run through an inverter to power the motor that spins the rotor. You can then unplug the motor from the original power source and the generator will power itself.

Cottage Industry Community Units specifically for the production of QEG’s are NOW developing in communities in 30+ countries.  The People are making their own free energy devices.

The QEG belongs to humanity now. Many will make further improvements and we will all co-develop this practical bridge technology together.

The QEG: For the People and By the People

Fix the World is currently traveling to Taiwan, London and Morocco for the month of April to help communities build QEG’s. Everything we have accomplished has been made possible by the donations of people like you. If you would like to help keep us going, every little bit helps! Please consider giving back and making a donation of any amount to the Fix the World Organization. By Clicking here:

http://hopegirl2012.wordpress.com/donate-to-hopegirl-ftw/

QEG Update w/Rob Potter, HopeGirl, Fernando Vossa, Alexandra Meadors 8pm EST on Revolution Radio 3/3/14 **TONITE**


Tune in tonight! Revolution Radio with Rob Potter, HopeGirl, Fernando Vossa, Alexandra Meadors, and more! We’ll be speaking on a variety of subjects including the Fix the World Organization, the Prepare for Change Organization, the Haiah project and the distribution of our quantum energy generator!

Victory of the light radio show. Click the link below and click play on studio A. 8PM EST Tonight March 2.

LISTEN HERE: http://www.freedomslips.com/newchat/live.htm

MISSION I”M POSSIBLE 3: MEETS HOPE GIRL LIVE ON AIR : FRIDAY 28TH FEB 8:00pm EST: HOW QEG WILL BE OPEN SOURCED


I’m listening NOW, this is an INCREDIBLE SHOW!! PLEASE SHARE THE NEWS FREELY, FREE ENERGY TECHNOLOGY IS HAPPENING! Mahalo! ~A~}

qeg

MISSION I”M POSSIBLE 3

QUANTUM ENERGY GENERATOR: QEG:

Public Advisory :

3D Printing Energy Global Networks and members of our MISSION I’M POSSIBLE team welcome Hope Girl and The QEG team to discussion on Expanding U Radio on the 28th February Friday evening.

EST 8:00pm 5:00Pm PST and over in Sidney 12 noon Saturday 1st March.

Here is the link to the show .

http://www.blogtalkradio.com/expandinguradio/2014/03/01/mission-impossible

 HOPE QEG ADVERT

QEG in a nutshell is a 10-15KVA Generator that needs no fuel  and the designs and plans are going viral in

an open source manner.

Hope Girl is the instigator of the release of those plans and we at Mission I’M Possible are delighted to get this opportunity to discuss this live on air with our team.

QEG ( Quantum Energy Generator) Click on Pic link below to learn more:

 1014061_494595790657730_1020744838_n

Here is the latest Hope Girl transcript of events as they unfold:

Managing Expectations for QEG Distribution: Important Information
February 22, 2014
More updates from Hope and FTW. We are in the process of making arrangements for the community we are setting up here in Morocco to be the main distribution hub for QEG’s in Africa. This is NOT about making $$. It’s about getting the devices into the hands of the people who need them most. After a few incredible Skype conversations over the last few weeks with Hope I’m convinced she is the perfect person to spearhead this project. Her sheer brilliance, heart of gold and pure intentions will ensure her success. As she says below, it has never been done like this before. It is the open sourced aspect of this development combined with her plans for distribution which will ensure everything falls right into place, as planned. It’s time to change the world. ~BK
If you would like to support Hope, here is the link to her Gofundme campaign:http://www.gofundme.com/hopegirlfixtheworldqeg –
Quantum Energy Generators – From Hope Girl…
We have CICU’s getting ready to start up their own QEG production and distribution in the following locations… Ladies and Gentlemen… we are now global!!!
Spain
Austria
Western Australia
New Zealand
Turkey
Netherlands
Morocco
South Africa
Canada
United States
Taiwan
Indonesia
Malaysia
Japan
Mexico

From myself and my family, we would like to thank you for your support around the development and distribution of the QEG. Over the course of the last few weeks we have received many inquiries and wanted to take this opportunity to answer some questions and manage expectations.

First we would like to highlight that the method in which we have developed and plan to distribute the QEG has NEVER BEEN DONE BEFORE. For this reason it is important to clarify some of the key differences between the QEG and any other product on the market.

A Consumers First Glimpse Behind the Scenes

The average consumer is not exposed to the research and development stages of a new product and only knows about the product when it is on the shelf and ready for purchase. The competitive business environment we have lived in for decades fosters secrecy and requires that those involved with product development sign non-disclosure contracts where they are forbidden to talk about the product until it is marketed for sale.

One of the core values of the Fix the World Organization is to foster co-operation instead of competition and we have exemplified this through the development of the QEG. From its inception, the QEG has been publically reported on to the people through all of the ups and downs of its development. Research and Development has always gone on behind locked closed doors in any major company, FTW flew open the floodgates from day one. This has had both positive and negative effects:

Positive: It allowed anyone to take part in the co-creation of this amazing breakthrough for humanity. Hundreds of people have donated, thousands have been following the development and receiving information that many other developers would never tell them. Knowledge is power for the people, and in turn, FTW has received the love, hope and support of the people to help us bring something like this through. We never could have done this alone, rather we chose to co-create it with all of you. We focus our efforts and energies on those in our global community that come to us with a spirit of bestowal and co-operation.

Negative: It made us a target and allowed open access to every being who is still operating in a stance of aggressive competition (meaning cutting someone down to “win” at all costs). We filter through hundreds of correspondences and comments on a daily basis. Approximately 95% of them are positive and supportive and 5% of them are negative. We are well aware of the network of “paid trolls” and the tactics used in an attempt to stop something that would threaten the oil industries. We view these negative comments as aggressive competition. In order to maintain the integrity and energy levels of the good work that we do, we do not support these attempts at aggressive competition and we do not engage in them in any way.

Reality Check: Time Frame Comparison

Here is some real data from a major electric motors manufacturing company gleaned from 27 years of employment by the QEG Engineering Artist:

Under these circumstances:
-An annual operation budget with multiple millions of dollars at their disposal.
-A team of 20 full time paid experts to work on development.
-A pre-established supply chain that was developed over 50 years to supply all order needs.

A major corporation can take a new product from inception to market in NINE MONTHS.
And this is just for something as standard as a vacuum cleaner. For something more significant, such as in the automotive industry, the same process can take 7 YEARS with triple the resources. Non-disclosure contracts are enforced by all involved and the consumer has no knowledge of the product until it is available for purchase.

The QEG circumstances:
-A Crowdfunded budget of a total of $30,000
-A team of three people: one developer and two assistants
-No established supply chain, but a few good leads and connections

It has been 5 MONTHS since QEG inception. Most of the entire research and development process is complete, the only thing we have left to do is the careful write up of the plans for opensourcing. We estimate that we are approximately 1 MONTH away from bringing this to market for a total of SIX MONTHS from inception to market. And this isn’t a vacuum cleaner! Information about the QEG has been made public since its inception; the public has had knowledge of this product and an opportunity to support it.

Our Release Strategy in Sequential Order:

First: Open Source QEG Plans
Second and Third Simultaneously: Take a limited amount of pre-orders to fund the creation of a training program, then assist other communities in training for their own local QEG production.
Fourth: Proof of Principle demonstrated by the people.

IMPORTANT GUIDELINES PRIOR TO OPENSOURCING EXPLAINED:

We’ve received a lot of various inquiries in the last few weeks and wanted to outline some of the precautions we are taking during this sensitive time prior to the open sourcing of the QEG:

Technical Questions:
We’ve received lots of requests to speak to the inventor for a “quick question” regarding technical aspects of the QEG. It is important that a FULL and COMPLETE body of information is released intact before any such questions are answered. Incomplete information gleaned from a 5 minute conversation can open the door to problems and may damage integrity. For this reason, the inventor would like to wait until after the open source documents are complete to answer any technical questions.

Proof of Principle Public Announcements: FTW will not make a public announcement such as: “it works”. Such public announcements draw unwelcomed attention and could complicate our main goal during this delicate time. Our goal is to get this to the people, help them build them and distribute the QEG freely to the world. Then, THE PEOPLE will make the public announcement of the QEG through their own personal testimonies. In the initial stages, FTW plans to use our network of trusted and respected professionals who participate in collectives such as the Breakthrough Energy Movement to provide testimony of the QEG’s successful operation.

Open Sourcing

Our first priority is to Open Source the plans for the QEG. We are currently working on the careful completion of a document package that will include drawings, a parts list, user manual, troubleshooting tips and a waiver. This package will be as simple as we can make it, but will be written for an audience that is assumed to have engineering expertise (hence the waiver); it is crucial to have an advanced level of training and/or understanding of the forces at work in the QEG.

Open Sourcing is a necessary first step before all others as it will provide the protection the QEG needs from suppression. Fix the World is freely giving the QEG away to the world. We are not aware of this being done before and we are working diligently to ensure that it’s done right. It is important that the document package is as thorough and complete as it can be because once it’s open sourced it is public and therefore unchangeable.

Liability

We are entering into a new world, a new paradigm and a new way of doing business. With this freedom comes great responsibility and many are about to experience what true sovereignty feels like. The QEG is a gift freely given to the world. The instructions will be complete and correct. For the experienced engineer who should choose to follow them carefully they will produce a safe working product. In this new paradigm, everyone needs to be responsible for their own actions, which is why we have a waiver and have been working with some new paradigm Law professionals who have been advising us on these matters. Fix the World is not responsible for the actions of others. For those that wish to build a QEG, we ask that you use careful thinking, patience, and consideration for the greater good. We don’t want anyone to build it wrong, waste their money, or get hurt.

Consulting, Training and Pre-Orders

We want to help teach others how to build their own QEG’s and create their own system of local distribution. To do this we are developing a training program that will involve travelling to communities (if needed) all around the world to help them start up their own production that we are calling Cottage Industry Community Units (CICU’s).

FTW does not intend, nor do we wish to become a manufacturing center for QEG’s, rather we want to invest most of our energy into training others to build them. We also would like to focus on new product development and other planet changing projects in the future. However, to raise the funds needed to launch such a training program, we will be manufacturing a limited number of QEG’s for sale and also for donations to help others.

We already have a tentative customer base established for the limited pre-orders, and another list is growing daily for those interested in our training program to establish their own CICU’s.

Immediately following the necessary Open Sourcing of the QEG plans, the manufacturing of QEG pre-orders will commence with an expected production time of 3-4 months for delivery. Also at this time, we will commence in the creation of our training program and will begin taking bookings for CICU start up travel.

Pricing

This is where things will get very interesting and humanity will have a chance to co-operate instead of compete. Prototypes always cost a lot more than replications. The first few always cost a lot more than those that follow, basic product production understanding tells us this. But what will happen when the QEG is released to the world without the limitations of competitive industry, price fixing, and non-disclosure agreements? The QEG might cost a lot more to make in the US than it does in other countries, but humanity can find co-operative ways to help even this out. There are other innovations like 3D printers that can play a huge role in creating the parts for the QEG at a fraction of the price. CICU’s can come up with creative ways to produce them for less and trade ideas with other CICU’s through social networking.

In this new paradigm, Adam Smiths “invisible hand” becomes the millions of invisible hands of the people who now have the power to moderate price through their own unhindered creativity. While humanity finds a way to even out pricing, millions of people across the planet will acquire QEG’s.

By lightworkersxm Posted in Uncategorized

http://xi4.com/2014/02/25/3d-printing-hope-girl/